Water Damage Restoration – A Brief Preview

It is the procedure of repairing a house or property to its pre loss condition. Injury to the property could possibly be as a result of an overflow, flood or some other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization on the basis of the water contamination levels, decontaminating and drying the structure, monitoring of the procedure and completion of the process. You will find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage due to water guide could be the benchmark tool that is used by companies that specialize in restoration of water damage.
water damage restoration Des Moines, IA

Loss Assessment and Categorization

Loss evaluation is the very first and the most crucial step in water damage restoration. The assessment needs to be correct so that an appropriate response can be taken. In restorating the damage brought on by water, technicians and the insurance companies must come together and understand what is damaged and how to start restoring the damage. Identifying the source of the damage, documentation of damage, and accurate estimates are mandatory for an effective water damage restoration. Categorization is on the basis of the contamination quantities of the water source. The categories are listed below

Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.

Category 2 – This really is water that has some contaminants like water from the dishwasher, automatic washer or toilet with urine.

Category 3 – This really is water that is highly unsanitary and is effective at causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.

Decontamination and Drying

Following the evaluation is complete, the procedure of drying and decontaminating begins at the site. On the basis of the extent of damage, damage caused due to water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – Once the damage would be to the whole room and carpet area. Class 3 Damage – When the whole area is saturated with water and Class 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is really a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination needs to be performed if contamination has been detected in the area. Decontamination may be performed for the whole area or in specific pockets where contamination has been detected.

Leave a Reply

Your email address will not be published. Required fields are marked *